ABS regrind mix color stocks availabe

• Material: High density polyethylene (HDPE)
• Appearance: Granular form, with uniform size and color
• Melt flow rate (MFR): Typically in the range of 0.1 to 50 g/10 min, depending on the intended application
• Density: Typically ranges from 0.94 to 0.97g/cm³
• Tensile strength: Typically ranges from 20 to 40 MPa, depending on the grade and processing conditions
• Elongation at break: Usually it ranges from 10% to 1,000%, depending on the quality and processing conditions
• Shore hardness: Typically ranges from 50 to 70 Shore D, depending on the grade and processing conditions
• Thermal stability: Typically stable up to temperatures around 80-90 ° C, although this may vary depending on variety and application
• Chemical resistance: Resistant to many acids, alkalis and organic solvents, although it can be attacked by some substances such as chlorinated hydrocarbons
• UV stability: Good resistance to UV radiation, although prolonged exposure may cause degradation and discoloration.

These specifications may vary depending on the specific quality and intended application of the HDPE granulate. It is always recommended to contact the supplier or manufacturer to ensure that the product specifications meet your specific requirements.

• Material: High density polyethylene (HDPE)
• Appearance: Granular form, with uniform size and color
• Melt flow rate (MFR): Typically in the range of 0.1 to 50 g/10 min, depending on the intended application
• Density: Typically ranges from 0.94 to 0.97g/cm³
• Tensile strength: Typically ranges from 20 to 40 MPa, depending on the grade and processing conditions
• Elongation at break: Usually it ranges from 10% to 1,000%, depending on the quality and processing conditions
• Shore hardness: Typically ranges from 50 to 70 Shore D, depending on the grade and processing conditions
• Thermal stability: Typically stable up to temperatures around 80-90 ° C, although this may vary depending on variety and application
• Chemical resistance: Resistant to many acids, alkalis and organic solvents, although it can be attacked by some substances such as chlorinated hydrocarbons
• UV stability: Good resistance to UV radiation, although prolonged exposure may cause degradation and discoloration.