Loading prices...

Register/Sign in
ScrapMonster
Are ads getting in your way? Register for Ad-free pages and live data.
Get an instant offer on your damaged car

Balers (horizontal)
82 equipment listed

Upgrade Your Account
Add Your Equipment for Free
Miscellaneous Horizontal Baler
Summit Equipment Inc based in Post Falls,Idaho,United States
Basic Member
Since Mar, 2013
VOLTAGE OPTIONS. All through 10HP are tri-volt ready for; 208 240 or 480 Volt power. All above 10HP are wired only for 480 V. operation unless an upcharge is added as follows (per motor): Optional voltage upcharge per motor for 15HP (standard=480 V.) Optional voltage upcharge per motor for 20HP (standard=480…
WB Series
American Baler Company based in St. Bellevue,Ohio,United States
Basic Member
Since Feb, 2013
The WB Series was designed specifically but not exclusively for non-ferrous materials. WB Series balers are primarily used by high volume MRF’s and scrap metal yards.  The WB Series was the first Two Ram with a stamper along with a shear blade weldment that was…
NB Series
American Baler Company based in St. Bellevue,Ohio,United States
Basic Member
Since Feb, 2013
The NB Series Ram II baler is specifically designed to be a versatile machine that can handle multiple grades of material.  The NB Series gives the operators the ability to have different setups for baling wire to be placed around the bale to hold memory retentive material.…
Predator Series
American Baler Company based in St. Bellevue,Ohio,United States
Basic Member
Since Feb, 2013
The Predator Series was specifically designed for low volume users with the possibility of a wide range of materials. Provides versatility towards materials. The Predator Series is available with three different cylinder sizes and two different feed openings. Heaviest design in the…
PAC Series
American Baler Company based in St. Bellevue,Ohio,United States
Basic Member
Since Feb, 2013
The PAC Series baler was designed for use in printers, box plants, document destruction, textile and etc.  Material can be air conveyed or mechanically conveyed.  The PAC Seriesproduces a mill or export size bale from material that is primarily either trim, shredded or die cuts.…
HS Series
American Baler Company based in St. Bellevue,Ohio,United States
Basic Member
Since Feb, 2013
The HS Series baler was designed to meet the requirements of High Volume Paper Brokers and MRF’s needing to process large amounts of material in a short period of time.  The HS Series utilize
Gladiator Series
American Baler Company based in St. Bellevue,Ohio,United States
Basic Member
Since Feb, 2013
The Gladiator Series wide box Two Ram is built with the same specifications as our NB Series Two Ram . The Gladiator Series offers an economical solution for paper brokers and recyclers who have multiple grades that needs to be baled. Gladiator
DC Balers series
American Baler Company based in St. Bellevue,Ohio,United States
Basic Member
Since Feb, 2013
Specifically designed for Distribution Centers. The DC Balers were designed specifically for facilities who handle whole upright boxes.  We also have the 42WS Series that can handle flattened corrugated boxes.  The DC Balers c
Two-Ram Series
Preferred Recycling Equipment Inc. based in GRIMSBY,Ontario,Canada
Basic Member
Since Feb, 2013
Description Two-Ram Horizontal Baler Series provides quick material change-over for multi-material recycling.   Cusomized to fit your recycling requirements Fully automatic operation requires less labor to operate Industry standard wire strapping unit Multi-materials capabilitie
LD Series
Preferred Recycling Equipment Inc. based in GRIMSBY,Ontario,Canada
Basic Member
Since Feb, 2013
Description For higher production levels and automatic operation, a horizontal baler can make your waste recycling operation more efficient.  LD Horizontal Baler Series  Applications are custom fit to your specific application and output requirements Automatic ram cycling saves the labor of…
Exp Series
Preferred Recycling Equipment Inc. based in GRIMSBY,Ontario,Canada
Basic Member
Since Feb, 2013
Description EXP Series - Hinged Side, Auto-Tie Baler  The EXP Horizontal Baler has a hinged side to shear and pre-compress the material, resulting in higher volume production with denser bales.  Fully automatic operation requires less labor to operate Extra-large feed openings for higher vol
8070 Baler Series
American Baler Company based in St. Bellevue,Ohio,United States
Basic Member
Since Feb, 2013
The 8070 Series designed with a 80″ x 80″ feed opening to handle oversize OCC along with high volume fiber grades.  Gives flexibility for feeding from any direction with a mechanical conveyor.  The 8070 Series is engineered with a side lid to maximize infeed…
6220LP Balers
American Baler Company based in St. Bellevue,Ohio,United States
Basic Member
Since Feb, 2013
The 6220LP was designed specifically for light weight materials to ensure maximum product being compressed with each stroke.  The6220LP with the lid press ensures that all material loaded into the charge box area is pressed down before the main plunger compress
5029 Balers Series
American Baler Company based in St. Bellevue,Ohio,United States
Basic Member
Since Feb, 2013
The 5029 Series baler was designed for tough material i.e., double/triple wall OCC, plastic and etc. Can be air conveyed or mechanically conveyed.  The 5029 Series baler is offered with or without a shear blade. 5029 Series Specs
43HS Balers
American Baler Company based in St. Bellevue,Ohio,United States
Basic Member
Since Feb, 2013
The 43HS Balers are designed for medium to large sized MRF’s, Paper Brokers. Handles OCC, printers mix, Office Paper, Newspaper, Plastic and light aluminum. With a 43 x 43 cross section the 43HS Balers will maximize bale weights with high product
61 - 75 of 82 equipment
Are ads getting in your way? Register for Ad-free pages and live data.

Search Equipment

Are ads getting in your way? Register for Ad-free pages and live data.
×

Quick Search

Advanced Search