Company history

1994
founding
Development of recycling of old plastics, especially DSD foils with a capacity of approx. 5,000 tpy

1994-1995
Development of recycling of old plastics
Development of recycling of old plastics, especially DSD foils with a capacity of approx. 5,000 tpy

1995
Injection molding with the product ECORASTER
Start of injection molding with the product ECORASTER and purchase of 2 injection molding machines with a capacity of ECORASTER production of approx. 80,000 sqm

1996 - January 20, 2012
Expansion of the recycling plant
Expansion of the recycling plant to a capacity of r. 30,000 t / year expansion of the injection molding plant to 5 injection molding machines with a capacity of the ECORASTER products of approx. 400,000 sqm.

2002 - 2003
Expansion of the spray shop
Reduction of recycling capacity to approx. 20,000 t / y expansion of the injection molding plant to an ECORASTER capacity of approx. 800,000 sqm. Production of plastic pallets started in October 2003 with a production output of approx. 25,000 pallets.

2004 - 2006

Further expansion of the injection molding capacity
Further expansion of the injection molding capacity to ECORASTER approx. 1,100,000 sqm and pallets on approx. 550,000 pieces.

2006
Enlargement of the ECORASTER product family
ECORASTER is now also used in the area of ​​green roofs.

2007
Expansion of injection molding capacity and production
Expansion of the injection molding capacity to 1.2 million sqm ECORASTER and pallets to around 700,000 pieces. 

Start of the production of medium and small pallets.

2011
ECORASTER sold 10 million square meters
10,000,000 square meters of ECORASTER - this corresponds to the area of ​​approx. 2000 soccer fields, a running distance of 30,000 km or in other words: the laying almost "once around the world!" 

February 2011
Largest capacity expansion in the company's history
Largest capacity expansion in recycling so far and start of the production of automotive parts.

The biggest single investment in the history of PURUS PLASTICS with 8.5 million euros.

2013
Expansion of injection molding capacity
With the purchase of a new 1,300 t machine KM 1300 / 17200MX from Krauss Maffei, we continue to focus on healthy growth. For us this means, on the one hand, capacity, but also the further development of technologies.

2013

Automation of material handling
By using the latest handling systems, the extrusion hall is now linked to the car wash. In this way, the agglomerates manufactured there can be fed directly into silos at the extrusion hall and made available to the extrusion lines. Automation goes hand in hand with a further expansion of injection molding capacities. Up to 2.5 million plastic pallets can now be injected at the site every year.

February 2013
Completion of the shape injection molding extension
Equipped for new challenges. In February 2013, the expansion measures in the area of ​​shape injection molding were completed. Always looking for new technologies, further investments are planned in the future, especially in the 2-component injection molding area.

December 10, 2014
Foundation of FORMEOTEC GmbH
Outsourcing of the automotive injection molding department in the newly founded FORMEOTEC GmbH on December 10th, 2014.

2015
Increasing the degree of automation in production
Replacement of two Wickert injection molding machines by an Ettlinger SRM400 and purchase of a new automation system for highly efficient, flexible injection molding processes. At the same time, the start of the pavement for a 5000 sqm input raw material warehouse on the company premises.