• Significantly reduce water consumption
• Save Energy - electricity, fuel and manpower
  • Full featured DC Controllers requiring no electrical service
  • Make system changes in minutes from anywhere
  • Total control of field lights

• Real-Time Flow Monitoring
  • High Flows - broken laterals or valve failures
  • Low Flows - clogged nozles or valve failures
  • Water Leaks - unscheduled water usage
  • Water Bursts - broken mainlines valve stuck open
• Comprehensive Management Reports (daily, monthly and yearly) of:
  • Water Usage
  • Weather Conditions
  • Power Consumption

IRRInet-ACE

New generation field unit expanding the IRRInet family of products providing versatile expandable solutions

The IRRInet ACE allows the integration of existing and new IRRInet systems using powerful communication capabilities via numerous types of media: radio, cellular, Wi-Fi, wire line etc.

The Modular design of the IRRInet-ACE provides large scalability and powerful field units to the IRRInet family of solutions.

Greater installation flexibility is provided with support of 3rd party sensors and PLC units as well as multiple communication options including broadband data over TCP/IP, radio, cellular and wire line.

The ARAD Hydrometer is a combination of components in a single unit; a water meter and an electrically activated double-chambered irrigation valve. This unit is typically used as a combination Flow Meter and Master Valve when installed as a component of the (ICC) IRRInet Control Center.

The hydrometer is capable of transmitting a “dry contact” closure, or pulse to the IRRInet Family of controllers. This pulse is then used to calculate the actual volume of water passing through the valve.

The impeller drives the register via a dry magnetic coupling which allows only the impeller to come into contact with the water. The register is hermetically sealed within a stainless steel capsule with a hardened glass lens. The register also includes a totalizer and a rotating leak detector.

The hydrometer is available in 1 1⁄2”, 2”, 3”, 4”, 6” and 8”. When specifying or ordering the valve it is necessary to select either a standard 24 VAC solenoid, or an optional 24 VDC latching solenoid. Standard pulse rates are 1 pulse per 10 gallons metered, unless specified otherwise.

When installing this valve as part of the ICC system, it is recommended that the valve be installed with 2 pairs (a total of 4) wires from the hydrometer to the controller.