Biltmore Iron & Metal Co Inc

1 Meadow Road, Asheville, North Carolina, United States | Memberships : ISRI

Standard Iron and Metal was started in 1929 in Asheville, N.C. Then in 1951 J. Paul and Sue Long rented the land that Standard Iron was located on from Mr. Harry S. Freeman (Freeman's Shoes).

  • J. Paul and Sue Long changed the name of the scrap metal business to Biltmore Iron and Metal Co. Biltmore was derived from George Vanderbilt who built the large estate in Asheville known as the Biltmore Estate, which adjoins Biltmore Iron and Metal. The name Biltmore derives from Bildt, Vanderbilt's place of origin in Holland, and 'More' the Anglo-Saxon meaning of open, rolling land.

  • In March 1951, Don Cloninger (a son in law of the Longs) started working with Paul and Sue Long until 1953 when he joined the Navy. At that time in 1953, John and Jeanette Fisher moved to Asheville. Jeanette is the Longs' niece. John Fisher began working at Biltmore iron at that point. In 1958, another of the Longs' son-in laws began working at Biltmore Iron, Bob Morton.

  • In 1961, Paul and Sue decided to get out of the business and asked Mr. Fisher if he would like to buy Biltmore Iron. Mr. Fisher secured a loan from a friend and he, Don and Bob continued scrapping until 1996.

  • In 1996, Vonna Fisher Cloninger (married Jeff Cloninger who is not related to the Asheville Cloningers!) and Mike Cloninger (Don's son) bought the business from their fathers. Jeff also works here as the President.

  • In 2005, Jonah Cloninger - Vonna and Jeff's youngest son joined the business. Then in 2006 Blake, Vonna and Jeff's oldest son began working in the business.

We Supply Containers
From one (1) cubic yard to 50-cubic-yard roll-off trailers; dumping hoppers; and flat-bed or van-type trailers.

Deliver Yourself
If you wish to deliver to our facility, we will weigh your vehicle on our electronic scales. Smaller quantities will be weighed either on platform or in-ground scales by one of several weigh masters. All scales are North Carolina state certified for accuracy yearly and calibrated monthly!

Environmentally Safe

Biltmore Iron & Metal Co. is dedicated to responsible and environmentally safe operating procedures and practices through compliance with all applicable local, state, and federal environmental laws and regulations.We are committed to maintaining an environmentally sound workplace as demonstrated by our adoption of industry developed, comprehensive environmental operating guidelines.

Our Services

Biltmore Iron & Metal Co. will supply containers from one (1) cubic yard to 50-cubic-yard roll-off trailers; dumping hoppers; and flat-bed or van-type trailers. If you wish to deliver to our facility, we will weigh your vehicle on our electronic scales. Smaller quantities will be weighed either on platform or in-ground scales by one of several weigh masters. All scales are North Carolina state certified for accuracy yearly and calibrated monthly! Biltmore Iron & Metal Co. will unload materials by crane or forklift, if needed. All services are performed quickly and efficiently.

Biltmore Iron & Metal Co. does not accept the following:

  • Beer Kegs
  • Cardboard
  • Capacitors
  • Closed Cylinders
  • Fluids of any type
  • Foil
  • Glass
  • Mercury
  • Paint cans
  • Paper
  • Plastics
  • Propane tanks, unless in two pieces
  • Radioactive materials
  • Rubber
  • Smoke detectors
  • Spray cans, unless punctured or crushed
  • Tires
  • Torque converters, unless drained
  • Televisions
  • Wood
Materials Accepted
Electronics
1Electric Motors
Metal
2 Radiators
3Aluminum
4Aluminum Cans
5Brass
6Bronze
7Cast Iron
8INSULATED WIRE
9Nickel
10Turnings

Company Services

Company Locations

1 Meadow Road
Asheville, North Carolina
United States
ZIP: 28803
View Directions

Phone : (800) 897-7712

Mail : info@biltmoreiron.com

Similar Yards

Yads in North Carolina