Pegasus Metals

Pegasus Metals LLC we make you part of the refining process. You are welcome to witness your melts, and all your questions will be answered by professionals.

• Scrap gold, silver, platinum and palladium refiners choice of many recognized companies.
• The correct smelter to sell any amount of scrap gold, silver, platinum and palladium.
• No minumum amount of scrap is too small.
• Low refining charges.
• Low assay fees, smelting.
• No inbound troy ounce weight charges on any silver, gold, platinum or palladium bearing precious metal material.
• The best price on your pure gold, silver, platinum or palladium, contained in your order.
• Pegasus Metals LLC. Provides significantly higher returns because of efficient and precise sampling techniques, accurate analysis and recovery.
• Come in for your smelting and assay services. Our prices are low in price but high in Quality and Accuracy.

MATERIAL SPECIFIC PROCEDURES

INSPECT THE MATERIAL:

1. Read over any accompanying paperwork and confirm description..

2. Make written notes of contaminants that may cause excessive melt loss, examples are: oil, stones, paper, moisture. etc.

3. Whenever possible remove any non-precious contaminants before charging and hold aside for review by customer or representative.

MELT PROCEDURE:

1. Load material into crucible and turn on power supply, bring power up to a level that will melt the metal quickly without causing it to spit.
2. Raise melt temperature enough to liquefy all elements in the crucible, melting point.

SAMPLING:

1. When all metals in the crucible are uniformly liquid and homogenous the melt is ready to be sampled.
2. Stir the molten metal well to insure it is thoroughly homogenized.
3. Dip pin sample into the molten metal.
4. Inspect sample quality; the lab needs at least 3 grams of good quality sample to complete their analysis.

CASTING:

1. After acceptable samples have been produced immediately the molten metal is poured into graphite mold.

COMPLETION:

1. Wait at least 5minutes before removing bar (s) from mold.
2. Use a needle-gun to remove any slag on the bar.
3. Clean with wire grinder to remove dust from bar.

SAMPLEING:

Pegasus Metals uses 3 sampling methods.

1. We offer Fire Assay Diplicate.
2. Fusion Fire Assay,
3. and x-ray.