Falcon Metals LP
707 E Grove St, Terrell, Texas, United States
Who We Are & What We Do:
Falcon Metals, L.P. is a privately held scrap metal recycling company based in Dallas, Texas that purchases all grades & types of ferrous & non-ferrous scrap metals directly from industry & from the general public. All of the metals are transported using Falcon’s fleet of trucks & scrap handling & storage equipment. In most cases, the equipment & freight is provided at no cost to the supplier.
Since our President & CEO, has over 30 plus years experience serving industry, Falcon Metals utilizes a comprehensive network of domestic & international companies to market the scrap metal to primary & secondary mills, foundries, extruders, casting companies & specialty refiners. As a result, Falcon Metals is able to achieve the highest rate of return possible for its scrap suppliers.
It is very important to note, that when you choose Falcon Metals as your scrap vendor, you will be doing business with people you will get to know personally. Every company is assigned a principal & secondary representative who will be knowledgeable & responsible for every facet of your scrap metal requirements. You & your employees will have the ability to contact them 24 hours/7 days per week so they can assist you in any situation.
Click to open Self Dumping Hopper Specifications
All of the scrap metals purchased are screened, graded, sorted & prepared by our experienced personnel. Precise analysis can be performed by the most up-to-date technological equipment available to ensure that every load is as free as possible from contaminants or off-spec material. The scrap is processed through a variety of methods that include hand sorting, shearing, torching and/or baling.
After the metals are sorted prepared & packaged per the consumers specifications, the material is ready for shipment via truck, railcar or ocean containers.
RECYCLING INDUSTRY
Recycling Industry – Falcon Metals is proud to be a participant in the Recycling Industry, conserving energy, protecting our environment & adding value to our economy.
The American scrap recycling industry directly employs over 30,000 people. Last year, the estimated value of scrap materials produced topped $30 billion. Two out of every three pounds of new steel produced in the United States is made from ferrous scrap while 60 percent of the non-ferrous metals and alloys produced in North America are made from nonferrous scrap and over 40 percent of the paper industry’s needs are met through the use of scrap paper & cardboard.
Last year in the United States alone, scrap recyclers handled more than 130 million tons of recyclables destined for domestic use and overseas markets. This tonnage included approximately:
• 70 million tons of scrap iron and steel
• 60 million tons of scrap paper and paperboard
• 4.1 million tons of scrap aluminum
• 1.5 million tons of scrap copper
• 1.1 million tons of scrap stainless steel
• 1.4 million tons of scrap lead
• 248,000 tons of scrap zinc
• 3.5 million tons of scrap glass or cullet (beverage containers only)
• 300,000 tons of scrap plastic (beverage containers only)
• 56 million scrap tires
This scrap is collected for beneficial reuse, conserving impressive amounts of energy & natural resources in the recycling process. According to the Environmental Protection Agency (EPA), the U.S.A energy savings from the recycled materials that would otherwise be destined for landfills compared to using ores and other virgin materials to make new product are:
- Recycled Aluminum – 95 percent energy savings
- Recycled Copper – 85 percent energy savings
- Recycled Plastic – 80 percent energy savings
- Recycled Steel – 74 percent energy savings
- Recycled Paper – 64 percent energy savings
Today, the scrap recycling industry in the United States is a sophisticated, capital-intensive industry, preparing millions of tons of scrap for reuse each & every year.
- Recycling Saves Natural Resources
- Recycling Saves Energy
- Recycling Saves our Environment
- Recycling Adds Value to our Economy
- Recycling is Good Business
| Materials Accepted | |
|---|---|
| Metal | |
| 1 | BRASS SHAVINGS |
| 2 | Alloy Shavings |
| 3 | Aluminum |
| 4 | Aluminum Shavings |
| 5 | Brass |
| 6 | CARBIDE |
| 7 | Cast Iron |
| 8 | Cast iron borings |
| 9 | Copper Shavings |
| 10 | Insulated Copper Wire |
| 11 | Nickel alloys |
| 12 | STEEL TURNINGS |
Company Locations
707 E Grove St |
Similar Yards
- Campbell Recycling
Augusta,Georgia,United States - Natural Ventures
Salt Lake City,Utah,United States - Regency Metals
Charleston,South Carolina,United States - A&A Iron and Metal Co LLC
North Bergen,New Jersey,United States - A&R Recycling Company Inc
Cinnaminson,New Jersey,United States
Yads in Texas
- Campbell Recycling
Augusta,Georgia,United States - Natural Ventures
Salt Lake City,Utah,United States - Regency Metals
Charleston,South Carolina,United States - A&A Iron and Metal Co LLC
North Bergen,New Jersey,United States - A&R Recycling Company Inc
Cinnaminson,New Jersey,United States