KR1200 COPPER WIRE RECYCLING MACHINE

Equipment | Choppers | Copper Wire Choppers

KR1200 Copper Wire Granulation Machine

This copper wire granulator is our thrid generation product, it is mainly used to process copper wire(electrical wire, signal wire, lighting wires, etc.) and aluminum wire(electrical wire) to get high purity output products. Compare to the second generation products, both of the capacity and separation performance is highly increased.

 

Scrap Cable Can Be Processed

House lighting wires, Ethernet(Cat 5/6) cables, heavy-duty cable(single core), heavy industrial cables, telecom cables, single core aluminum cables.etc

Copper Wire Granulator performance

Processing capacity1000kg/h (It will change when process different material)
Recovery rateOver 98% (It is based on the thickness of cables)
Purity of the finish productsOver 99.8%
 

Copper Wire Recycling Process

1st Feed the material into crusher to pulverize the material into 3-4mm granules.
2nd The material will be carried into air separator by belt conveyor and our belt conveyor is equipped with suspended magnet to separate the iron scraps.
3rd By vibration and high press wind the air separator can separate the copper granules from the plastic.

We also equip two sets vibration screen to re-separate the outlet material to achieve better products. For example:
If the raw material is mixed with jack plugs and the plugs are made of brass and plastic, during the pulverization, the brass will mix with copper circuits. Through the vibration screen we could separate the brass from the pure copper circuits to achieve a higher purity copper.
If the raw material is mixed with thin cables, during the air separation, the small copper circuits will be effected by the high pressure wind and then mix with the outlet plastic.
By using the vibration screen, we could separate the thin copper circuits from the plastic to achieve a better recovery rate and higher purity outlet plastic.

Technical Parameters of Granulator

Model
KR1200
Feeding Capacity
1000kg/h
Cable Diameter Range
0.5-30mm
Voltage
380V/3 phase/ 50/60Hz(Can be customized)
Power
90kw
Weight
6000kg
Dimensions
L:8000mm; W:1900mm; H:2300mm
 

Contact Phone+86 15838030256
FaxN/S
Product PriceN/S
Offer PriceN/S
Contact Address luokou village, Xicun Town
Gongyi City, Henan
451200
China
Websitehttp://keruimachinery.com/products/3.html