Balers/Compactors

Add Your Products

EX62 & EX63 Series Balers - Paper Baler Machines

Basic Member
Since Feb, 2013
Clackamas,Oregon,United States

Description The Excel EX62 & EX63 balers are designed to perform as paper recycling balers, cardboard balers, newspaper balers, aluminum can balers, tin can balers, PET balers, and HDPE balers. These…

solar compactor

Basic Member
Since Feb, 2013
Clackamas,Oregon,United States

Description  The BigBelly® Solar Compactor is a patented compacting trash receptacle that is completely self-powered. Instead of requiring a grid connection, BigBelly uses solar power for 100%…

High Rise Compactors

Basic Member
Since Feb, 2013
Clackamas,Oregon,United States

Description When a high rise building calls for internal trash chutes a small compactor is often placed directly below it. The chute provides the tenant the convenience of disposing of their trash by…

Stationary Compactors

Basic Member
Since Feb, 2013
Clackamas,Oregon,United States

Description Stationary compactors are intended primarily, although not exclusively, for the collection of materials where liquids are not present. Selecting the correct compactor begins with its application.…

Self Contained Compactors

Basic Member
Since Feb, 2013
Clackamas,Oregon,United States

Description Self-contained compactors are one complete unitized unit intended primarily, although not exclusively, for the collection of materials where liquids are present. This compactor is most commonly…

Typical 60" Baler

Basic Member
Since Feb, 2013
Clackamas,Oregon,United States

Description  When it comes to baling, the vertical baler is the most popular and widely used model in the country. Ranging in size of bales produced, the vertical baler can be used for a variety…

HV9 & HV10 Series Balers - Outstanding Aluminum Baler

Basic Member
Since Feb, 2013
Clackamas,Oregon,United States

Description Two ram construction in a single ram baler. The Excel HV9 & HV10 have the revolutionary single sheet, interlocking construction found in our two ram balers. The floor and side sheets are…

Moros G-CG-200 Baler

Basic Member
Since Feb, 2013
Pulborough,West Sussex,United Kingdom

Description This baler is specially made for processing long copper profiles. The machine has a hopper with a hold down and is able to cut those profiles into small pieces with its main lid, producing…

Lindemann BIGRO Baler

Basic Member
Since Feb, 2013
Pulborough,West Sussex,United Kingdom

 This well-maintained 10-year-old baler is ideal for cardboard and plastics. Includes conveyor/loader.  Description This Lindemann BIGRO Baler is approximately 10 years old and is in good condition,…

Lefort Conqueror 500T Shear

Basic Member
Since Feb, 2013
Pulborough,West Sussex,United Kingdom

 Description This scrap shear was manufactured in 2003 and is in good working condition. Ideal for cutting all kinds of ferrous and non ferrous scrap (both light and heavy material), it can also…

KK 500 Balemaster

Basic Member
Since Feb, 2013
Pulborough,West Sussex,United Kingdom

This recent model is in excellent working order and will compress card, plastics and other materials into dense wire-tied bales.  Description This powerful machine out performs any other vertical…

Moros GC-L-101 Mobile Car Baler

Basic Member
Since Feb, 2013
Pulborough,West Sussex,United Kingdom

This Moros GC-L-101 mobile car baler was manufactured in 2000 and includes a high specification feeding crane  Description Built on tri-axle and powered by a diesel engine, this Moros GC-L-101 mobile…

MMH Buffalo Baler

Basic Member
Since Feb, 2013
Pulborough,West Sussex,United Kingdom

This relatively new machine is suitable for non-ferrous and ferrous material. Description This good-as-new baler delivers three-ram compression and 125 ton of force to produce 300mm x 300mm bales of ferrous…

Film Baler

Basic Member
Since Feb, 2013
San Diego,California,United States

 IPS offers innovative Film Balers that improve the efficiency of your baling process: Vertical & Standard Closed-Door Balers to handle the baling of “shrink wrap” (utilized in Distribution…

Waste Baler

Basic Member
Since Feb, 2013
San Diego,California,United States

 IPS offers a Two-Ram line of Balers which have very high density and bale quality on MSW material. Our pre-compression lid eliminates knife jams and extends the life of the wear liners. Our Two-Ram…