Process Wastewater Technologies LLC

Process Wastewater Technologies LLC is a leading global manufacturer of products for biological treatment, CSO/SSO, biosolids/sludge handling and municipal wastewater. We revolutionized the storm water and CSO treatment industry in the early 1990s by introducing continuous deflective separation technology to the market. We offer technologies for gross solids and sediment removal from large and small sanitary and combined sewer overflows, biological phosphorous and nitrogen removal, and sludge thickening and dewatering. Our products and expertise have been proven by extensive independent laboratory studies and thousands of installations in the U.S., Canada, Australia, New Zealand, United Kingdom, and the Asian Pacific Rim. In fact, PWTech technology has been listed as a structural Best Management Practice (BMP) by the U.S Environmental Protection Agency.

DESCRIPTION

This high-performance submerged aerated biological filter provides proven treatment of domestic and industrial wastes in hundreds of installations worldwide, the Submerged Aerated Filter (SAF) has few moving parts, requires very little maintenance and is easy to operate. The SAF could be described as a box of media. It utilizes a rigid, corrugated, structured polypropylene media to give a high surface area for biomass attachment (200 ft² per ft³). The media is arranged into cells-in-series where effluent is contacted with the fully submerged media in the presence of co-current aeration. Use of high-quality components means that a SAF will give many years of service.

ADVANTAGES

• Pre-assembled for rapid installation
• Easily transported rental units are available
• Compact, efficient design, less than 
  ¼ that of a comparable suspended-growth aeration tank
• Minimal regular maintenance

• Long life
• Quiet operation with low odor and low visual impact
• High quality effluent
• Can be used in BNR flow schemes
• Low sludge yield factor

CONSTRUCTION

The external walls of the SAF are manufactured of ¼' steel or â…›' 304 Stainless Steel, with pressed ribs for stiffening. The surface is coated and may also be insulated for extreme environments. All plumbing is polished stainless steel and ABS or PVC plastic as standard. Air is supplied by two low-maintenance regenerative blowers (Duty-Standby). These are housed in a fiberglass kiosk along with the controls. A secondary clarifier tank follows the SAF for removal of any biomass that sloughs off the media during operation.