SyncroFlo, Inc
2905 Pacific Drive, Norcross, Georgia, United States | Energy
About Us
Founded in the early 60’s, SyncroFlo pioneered pre-assembled pumping systems. Today, our installed system base includes some of the largest pumping systems ever built. SyncroFlo was formed as a division of Schaub Engineering, a Chicago-based company that made power plant equipment. Schaub had several divisions, one of which made a pump and another that made flow switches.
SyncroFlo was the first company to prepackage pumping systems for domestic water (plumbing) use. There were two other companies that were also promoting packaging of plumbing pumps at that time: Peerless and Chicago Pump. The packages promoted by these companies were what we call 'kits,' meaning that the contractor still built them in the field, SyncroFlo, Inc. initiated the concept of assembling these kits prior to shipment to ensure quality performance.
In the early 70’s Schaub decided that it was going to devote all its resources to building equipment for a new kind of power plant, the nuclear power plant. Schaub divested itself of all divisions that didn’t have to do with nuclear power
.
Twenty-five years later, SyncroFlo now employs approximately 100 personnel. SyncroFlo started by making plumbing boosters, then municipal was added. In the late 1980’s, we started building packages for HVAC, fire protection, and turf irrigation, and grew into the company that the industry knows us as today.
We Take Your Project As Seriously As You Do
Single-Source Responsibility
From the day it’s installed, your pump system is backed by our network of top sales and service people. If you have a challenge, we’re there for you with answers and expertise. Your SyncroFlo representative has the responsibility, the ability — and more importantly, the power — to make things right. Single-source responsibility is the only way we do business. Satisfied customers and 20,000 packaged pump systems in 50 states and 32 countries are proof that our way works.
Factory Flow Testing and Setup
Your SyncroFlo pumping system is ready for installation when you get it. It’s fully assembled, tested, skidded, and delivered to your site. Our package pump systems give you the highest quality and simplest installation. That’s the way it’s been since we pioneered package pump systems in 1962. Today, top engineers and contractors still think of us as the experts on pre-built, pre-tested systems.
Our Goal

Single Source Responsibility
Municipal packaged pumping systems may not be placed under full load conditions until years after installation. Then, if there is a performance shortfall, it is difficult to pinpoint responsibility. With SyncroFlo you need only to deal with us, your single source.
Pressure, flow controls and safety alarms are calibrated to on-site conditions. Total system performance curves may be printed on an X-Y recorder that simultaneously plots and displays sensor inputs from pressure transducers and magnetic flow meters. All of our testing eliminates start-up problems at the job site and ensures that the system meets projected performance criteria.
Custom Engineered Solutions
Every manufacturer has its standards. With SyncroFlo, you can be sure that you have a partner with the flexibil¬ity and expertise to evaluate every possibility for the best value. That goes for both hardware and software.
Preset and Tested: A SyncroFlo tradition since 1964
Since the beginning, SyncroFlo has always flow tested its water booster systems. Current capabilities are 5000 gpm at 400 psig. Instrumentation is certified to NIST standards.
SyncroFlo’s experience and expertise in variable speed technology.
We built our first pump system with electronic variable speed over 30 years ago. Today, we manufacture variable speed control systems for a wide variety of applications. We routinely deal with high pressure and rapidly changing flow rates that are much more difficult to control than the low pressure, slower acting characteristics of the typical municipal system. We apply all of this experience on our variable speed projects so that each one gets the right type of control method, without
guesswork.
Third Party Communications Systems.
Our variable speed PLC programs are sophisticated and powerful. We have programmed our PLC’s to communicate with a wide variety of telemetry RTU’s in the municipal market as well as with building control systems in the Commercial and HVAC markets. In addition, we have written our own software monitoring and remote control software for use with our
pump stations.
Typical Municipal Applications
• Seal Water System
• Tank Fill System
• Water Treatment High Service
• Water Treatment Distribution
• Secondary Effluent Irrigation
• Distribution and Fire Ring Main Systems
• Water Pressure Booster Station
• Plant Water System
SyncroFlo will design and fabricate your system with any required components and in any specific configuration. Third Party Total System Certification through both ETL and ISO 9001
Some popular options are:
• Building Enclosures
• Outdoor Weather Protected Systems
• Complete Motor Control Centers
• Variable Frequency Drives
• Altitude Valves
• Reduced Voltage Start
• Flow & Pressure Recorders
• Remote Annunciator Panels
• Diesel Generator Sets
• Stainless Steel Headers
• Fusion Bonded Headers
• Surge Anticipator Valves
• Automatic Self-Cleaning Strainers
• Other Options Upon Request
| Company Details | |
|---|---|
| Company Name | SyncroFlo, Inc |
| Business Category | Energy |
| Address | 2905 Pacific Drive Norcross Georgia United States ZIP: GA 30071 |
| President | NA |
| Year Established | NA |
| Employees | NA |
| Memberships | NA |
| Hours of Operation | NA |
Similar Companies
- Rayotek Scientific, Inc
San Diego,United States
- GreenTech Renewable Solutions, LLC
Cary,United States
- Sun Valley Solar Solutions
Chandler,United States
- KW PowerLogic Inc
Brussels,United States
- Dynamic Energy
Wayne,United States